Web design

Frequently Asked Web Design Questions

If you’d like to do business on the Internet, launching a quality web site is
an absolute must. Learning how to design your own web site can be a little intimidating.
However, there is a wealth of free information available on the Internet to assist
you.

The best way to learn is by doing. Take the first step and begin researching.
Once you understand the basics of Singapore web design, you can begin experimenting with
some more advanced coding techniques.

A great place to start is HTML Goodies:

http://www.htmlgoodies.com/primers/primer_1.html

Over the years, I have received many questions in regard to web design. Below,
are some of the most frequently asked questions I receive on a regular basis:

Question: I am in the process of designing my first web page and am confused
about making it compatible with all the different web browsers. Can you help?

Answer: Although there really isn’t a “set in stone” solution to
developing a web design Singapore that will display properly in all browsers, there are
some basic guidelines that will assist you.

The best advice I can offer is to develop your site to be compatible with Internet
Explorer and Netscape Navigator, as these are the two most widely used browsers.

Although the latest versions of the two browsers are fairly comparable, you
must take into consideration that many of your visitors won’t have the latest
versions.

Some of the main differences between earlier versions of the two browsers are
as follows:

(1) In order to center a “table” within earlier versions of Netscape,
you must enclose your “table” code with the CENTER and /CENTER tags
instead of using P ALIGN=CENTER. The CENTER tag is compatible with both browsers.

(2) When creating form fields, if you use the maxlength code within your code,
Netscape will display the input box the length of the maxlength code value.

(3) If you would like to display your web page full-screen or adjust the margins,
you’ll need to use the following codes within your BODY tag:

This margin code is compatible with both browsers.

Internet Explorer supports:

topmargin=0

bottommargin=0

leftmargin=0

rightmargin=0

Netscape Navigator supports:

marginheight=0

marginwidth=0

(4) Avoid using special design techniques that require a special browser extension
or plug-in, as many of your visitors will need to download and install the plug-in
before they can use your site — most won’t.

If you follow these few guidelines, you shouldn’t have any problems with browser
compatibility.

A great way to ensure your site displays properly is to download and install
both Internet Explorer and Netscape Navigator. This will enable you to view
your site through both browsers.

Internet Explorer

http://www.microsoft.com/windows/ie/default.asp

Netscape Navigator

[http://channels.netscape.com/ns/browsers/download.jsp]

You can find a nice “Browser Compatibility” chart at the following
web address:

[http://www.webreview.com/browsers/browsers.shtml]

You can test your site’s compatibility at the following web addresses:

http://www.anybrowser.com

http://www.netmechanic.com

Question: I can’t get my image to display on my web page. I placed the image
code in my page, but all I see is a “red X” where the image should
display. Can you tell me what the problem may be?

Answer: In order for an image to display on a web page, it must first be uploaded
to your server in “binary” mode. If you’ve verified that your image
has been uploaded properly, your next step will be to double check your image
HTML code. Make sure that the image address leads to your image and is spelled
exactly the same. Keep in mind, the name of your image is CaSE SeNsiTIve. In
other words, if your image name is “Image.gif” on your server, it
must look exactly the same within your code.

Question: I would like to display my text, side by side, like a newspaper,
but I can’t figure out the code.

Answer: In order to display your text like a newspaper, you must place it within
a table.

text

text

Question: When I placed my text within my page, it’s right up against the left
border. Is there any way I can correct this?

Answer: Yes, you can place your text within a table. You can specify the width
of your table to determine the distance between your text and the left and right
border of your web page.

text

This table code will display your text across 80% of your web page with a border
of 10% on the left and right side.

If you’d rather not use a table, you can also set your page borders within
your BODY tag:

Question: I have specified a font face at the beginning of my web page, but
the font face isn’t displaying within my tables. Can you tell me what the problem
may be?

Answer: In order to display a specific font face within your tables, you must
use a separate font tag within each table cell.

text

text

If you’d rather not use a font tag within each of your table cells, there is
an easier way. Place the following code between the HEAD and /HEAD tags. This
code will specify the font style for all of your table cells.

Question: I’ve placed a form code within my web design company singapore, but my form isn’t working.
Can you help?

Answer: In order for a form to function, in addition to placing the form HTML
within your web page, you must also use a CGI form processing script. This script
will reside on your server within your CGI-bin and will be called from your
form code within your HTML. Your code might look something like this:

The “cgi-bin/example.cgi” text should be changed to the address of
your form processing script.

You can find free form processing scripts at the CGI Resource Index.

http://cgi.resourceindex.com/Programs_and_Scripts/Perl/

Learning how to design a great web site isn’t easy. However, if you take the
time to educate yourself and start with the basics, you’ll be well on your way
to Singapore web design a great site.

Copyright © Shelley Lowery

Article Source: http://EzineArticles.com/109312

Advertisements
Standard